Enhancing wastewater plant capacity through aerobic granular sludge
The purpose was to enhance the removal of nutrients and solids to increase plant capacity through low-cost operational improvements.
This will help the Mount Compass wastewater treatment plant prepare for anticipated environmental discharge requirements associated with growth in the township.
Who this is for
Council staff looking to enhance and increase wastewater treatment plant capacity.
What's being delivered
Report showing whether this method enhanced removal of nutrients and solids to increase plant capacity through low-cost operational improvements.
About the project
The Mount Compass wastewater treatment plant treats wastewater through a screen, a balance tank and a sequencing batch reactor (SBR), then a lagoon, chlorination and reuse. The SBR was designed to remove organic matter and solids, not nutrients.
To improve phosphorus removal, the SBR cycle was modified with an aerobic feeding phase that encourages phosphorus accumulating organisms (PAOs), which take up volatile fatty acids (VFAs). Sludge wasting was moved to the upper settled sludge bed (1500 mm depth), removing light, poorly settling biomass while keeping dense, PAO-rich sludge and reducing sludge bulking.
Late in the trial, the feed pipe was moved to the SBR bottom to favour these well-settling PAOs.
Outcomes
Adding an anaerobic feed phase at the Mount Compass wastewater treatment plant improved phosphorus removal and sludge settling within 1 to 2 months. Testing confirmed that phosphorus accumulating organisms (PAOs) were removing the phosphorus.
Although fully developed granules did not form, these low-cost changes reduce chemical dosing, control sludge bulking and can be used at other SBR plants.
The main benefits shown were that the process:
- is low-cost
- improved phosphorus removal, reducing reliance on chemical dosing
- is transferable to other SBR-based wastewater treatment plants.
Final project report
View the Enhancing Capacity through Aerobic Granular Sludge Final Report (PDF 2.2 MB).
Project funding
This project was funded through the Community Wastewater Innovation Fund.
This scheme allocates funding to projects to support innovation within the CWMS sector. Successful applicants are decided through an annual grant round.
Project snapshot
Documentation & links
Find out more
For more information, please contact: cwms@lga.sa.gov.au